How Do 3D Motion Stickers Work? Where to Stick Them
A 3D motion sticker is a printed picture with a sheet of tiny ridged lenses on top. The artwork underneath is really a set of pictures cut into thin strips and woven together. Each ridge sends you a different strip depending on where your eyes are, so when you tilt the sticker or walk past it, the picture changes.
That's the whole trick. It's called lenticular printing, and our stickers put anime characters on it.
What's going on under the lens
The clear plastic layer on the front is moulded into rows of thin lenses, called lenticules.
Behind them sits the print. Before printing, the artwork is made from more than a picture: the frames are sliced into strips and interlaced into a combined image. The lenses line up with those strips. Light from each strip leaves the lens at a slightly different angle, so from where you stand you only see the strips meant for that angle. Move, and a different set lines up.
The picture changes because your angle changes.
Why some designs flip and others look deep
Different designs do quite different things, depending on how far you have to tilt them before the picture changes. Lenticular prints generally fall into these effects:
- Flip. A bigger tilt swaps the whole picture for another.
- Animation. Frames with small differences between them play like a very short clip as you tilt.
- Morph or zoom. Part of the picture changes shape or size.
- Depth. Each of your eyes sees a slightly different image, so the picture looks layered and 3D without glasses.
Our listings don't say which effect each design uses, but the name gives you a clue: Goku Transformations, Tanjiro Transform, Abra Evolution, Pikachu Wink, Pikachu and Raichu Dancing. Each one uses the same lenticular printing, so its picture shifts as you move.
Product photos can't really show this, because a photo is taken from a fixed angle.
Where you can stick them
Our 3D motion stickers are made for cars, notebooks, phones and windows, and they're waterproof, so they're fine indoors or outside. The adhesive is strong, so it pays to get the position right before you press it down.
What makes a good spot is mostly about the lens:
- Flat and smooth beats curved. The effect depends on the angle between your eyes and the ridges. Stick it over a tight curve and the ridges point in different directions across the sticker, so the picture can look muddled in places.
- Somewhere you'll see it from different angles. A sticker on the back of a phone gets tilted all day, which is exactly what it wants. A car window or a notebook cover works because people pass it, or you pick it up.
If you'd rather not commit something to a surface, the same print shows up on things you carry. Our 3D motion keychains use the same lenticular print for your keys or bag, and our 3D card skins are an ultra-thin version that changes as the card tilts. For a wall, the 3D motion posters are light and easy to hang.
How to put it on without bubbles
If bubbles are what worries you, these are the steps a sticker printer's guide recommends:
- Wipe the spot with a dry cloth, then clean it with isopropyl alcohol and let it dry. Skip ammonia-based glass cleaners, which can leave a residue that stops stickers holding.
- Hold the sticker over the spot with the backing still on and check it's straight and where you want it.
- Peel the backing slowly, rather than ripping it off in a go.
- Press from the centre outwards, so any air escapes at the edges instead of getting trapped in the middle.
- Smooth it down with a squeegee or a plastic card wrapped in a soft cloth, so you don't scratch the lens face.
- If a stubborn bubble stays, prick it with a pin and press it flat.
- Leave it alone for a while. The bond keeps building after you've pressed it on.
The soft cloth in step 5 is our addition: on a lenticular sticker the front is the lens, so treat it the way you'd treat a screen.
Choosing a design
Pick the character first, obviously. Then think about the effect. A flip design is the most dramatic on a car window or laptop lid, where people see it from far off. Animation and depth reward a closer look, so they're at home on a phone or a notebook you hold.
We stock 3D motion stickers from One Piece, Demon Slayer, Naruto, Dragon Ball, Pokémon and more, and we deliver across South Africa. Pick your character from our 3D motion stickers and give your phone, notebook or car something that moves.
